BiggiWiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
I'm trying to "IoT-up" my house, and thought MQTT would be a good distributer for data to different services. I recently set up temperature+humidity sensors, and wanted to graph that data. Grafana+InfluxDB seemed like a good choice, but getting data from MQTT to InfluxDB seemed like a hassle with the available tools, so I wrote a short bash script to grab the data + send it to InfluxDB:

<code>
#!/bin/bash
# Global vars
INFLUXDBHOST="localhost"
INFLUXDBPORT=8086
INFLUXDBNAME="mqtt"
MQTTHOST="127.0.0.1"

# Fetch the data, insert the data, do some stuff.
mosquitto_sub -v -t '#' -h $MQTTHOST | while read line; do
       echo "`date` - Got: $line"
# Get vars
	SENSORNAME=`echo $line | cut -d'/' -f3 | sed 's/ /\\\ /g'`
	SENSORTYPE=`echo $line | cut -d'/' -f5 | awk {'print $1'}`
	SENSORDATA=`echo $line | awk {'print $NF'}
# Insert data to influxdb
	curl -XPOST "http://$INFLUXDBHOST:$INFLUXDBPORT/write?db=$INFLUXDBNAME" --data-binary "$SENSORTYPE,sensor=$SENSORNAME value=$SENSORDATA"
done
</code>

Data is fetched via. mosquitto_sub like this (as seen in the script above):
<code>
biggi@datbox:~$ mosquitto_sub -v -t '/sensor/#' -h 127.0.0.1
/sensor/ESP8266-538530/data/temperature 20.50
/sensor/ESP8266-538530/data/humidity 78.50
/sensor/ESP8266-1456529/data/temperature 20.80
/sensor/ESP8266-1456529/data/humidity 74.60
/sensor/ESP8266-538530/data/temperature 20.50
/sensor/ESP8266-538530/data/humidity 78.40
/sensor/ESP8266-1456529/data/temperature 20.80
/sensor/ESP8266-1456529/data/humidity 74.60
</code>

So /sensor/<device name>/data/<type> <value>.
Without "-v", you don't get the sensor name, just a value, so that is important to add.